The Eminent 5 Port Networking Switch allows you to set up a network fast and easy. The Networking Switch has 5 independent 10/100Mbps ports supporting full-wire speed transmissions in half or full duplex modes. Do you wish to offer quick network or Internet access to all users? The Networking Switch achieves optimal performance, thanks to the N-Way auto-negotiation function. The Networking Switch can automatically choose the correct speed. Cross-over detection ensures that users can connect the switch to another switch or hub without needing to connect a crossover cable. Perfect for setting up or extending your network!

Technical specs
Networking Switch 5x 10/100Mbps ports
Automatic cross-over detection
Power supply included
LED on each port for link and activity
Easy installation
5-Year warranty
Accessible helpdesk

System requirements:
10/100Mbps network

Suited for Windows, MAC OS and Linux

Fast Ethernet Office Switch
5 Port, Compact, Plastic

10/100 auto-sensing ports - automatically detect optimal network speeds
Supports any combination of 10 Mbps or 100 Mbps network devices
All RJ-45 ports with Auto-MDIX and NWAY auto-negotiation support
Store and forward switching architecture
Full/half duplex operation
LEDs for power, link/activity
Compact plastic case
Lifetime Warranty
Color Black

Specifications
Standards
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (flow control, full duplex mode)

General
Media support:
- 10Base-T Cat3, 4, 5 UTP/STP RJ-45
- 100Base-TX Cat5 UTP/STP RJ-45

Ports:
- 5 RJ-45 10/100 Mbps ports

Packet filter/forwarding rate:
- 148,800 pps (100 Mbps)
- 14,880 pps (10 Mbps)

Switch architecture: store and forward
Buffer memory: 128 kBytes
MAC address table: 1024 entries
Certifications: FCC Class B, CE Mark

LEDs
Power
Link/Act
Power
External power adapter, 9.0 V AC
Power consumption: 2.5 Watts (maximum)

Package Contents
Fast Ethernet Office Switch
External power adapter
User manual

The Eminent 8 Port Networking Switch allows you to set up a network fast and easy. The Networking Switch has 8 independent 10/100Mbps ports supporting full-wire speed transmissions in half or full duplex modes. Do you wish to offer quick network or Internet access to all users? The Networking Switch achieves optimal performance, thanks to the N-Way auto-negotiation function. The Networking Switch can automatically choose the correct speed. Cross-over detection ensures that users can connect the switch to another switch or hub without needing to connect a crossover cable. Perfect for setting up or extending your network!

Technical specs
Networking switch 8x 10/100Mbps ports
Automatic cross-over detection
Power supply included
LED on each port for link and activity
Easy installation
5-Year warranty
Accessible helpdesk

System requirements:
10/100Mbps network

Fast Ethernet Office Switch
8 Port, Compact, Plastic

10/100 auto-sensing ports - automatically detect optimal network speeds
Supports any combination of 10 Mbps or 100 Mbps network devices
All RJ-45 ports with Auto-MDIX and NWAY auto-negotiation support
Store and forward switching architecture
Full/half duplex operation
LEDs for power, link/activity
Compact plastic case
Lifetime Warranty
Color Black

Specifications
Standards
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (flow control, full duplex mode)

General
Media support:
- 10Base-T Cat3, 4, 5 UTP/STP RJ-45
- 100Base-TX Cat5 UTP/STP RJ-45

Ports:
- 8 RJ-45 10/100 Mbps ports

Packet filter/forwarding rate:
- 148,800 pps (100 Mbps)
- 14,880 pps (10 Mbps)

Switch architecture: store and forward
Buffer memory: 256 kBytes
MAC address table: 1024 entries
Certifications: FCC Class B, CE Mark

LEDs
Power
Link/Act
Power

External power adapter, 9.0 V AC
Power consumption: 2.5 Watts (maximum)

Package Contents
Fast Ethernet Office Switch
External power adapter
User manual

10/100 auto sensing ports - automatically detect optimal network speeds
Supports any combination of 10 Mbps or 100 Mbps network devices
All RJ-45 ports with Auto-MDIX and NWAY Auto-Negotiation support
Store and forward switching architecture
Full/half duplex operation
Supports 2048 MAC address entries
96 kBytes buffer memory
Compact metal case
LEDs for power, link/activity, full/half duplex
10/100 Mbps and half/full duplex
Lifetime Warranty

Special Features
16-Port, Desktop, Metal, fits in 10" rack
Color Black

Specifications
Standards
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (flow control, for full duplex mode)
Media support:
- 10Base-T Cat3, 4, 5 UTP/STP RJ-45
- 100Base-TX Cat5 UTP/STP RJ-45
Packet filter/forwarding rate:
- 148.800 pps (100 Mbps)
- 14.880 pps (10 Mbps)
Buffer memory: 96 kBytes
MAC address table: 2048 entries
Switch architecture: store and forward
Certifications: FCC Class B, CE Mark
LEDs: Power / LINK/TX / Full/half duplex / Power
External power adapter, 7.5 V DC
Power consumption: 8 Watts (maximum)

Package contents
Fast Ethernet Office Switch
External power adapter
User manual

ENH916P-NWY
10/100 16-PORT SWITCH

KEY FEATURES
Provide sixteen Fast Ethernet (10/100 Mbps) ports
Allow each port to run at its optimal speed while reducing network congestion
Feature plug-n-play operation that doesn’t require any software configuration
Provide front-panel diagnostic LEDs to monitor the operating status of the ports and the whole system
Provide compliance to many networking protocols
Allow micro-segmenting large networks into smaller networks for improved performance

Encore 16-Port 10/100Mbps NWay Switch is capable of delivering significant network load originating from large user group or from sources, such as video, audio, and graphic content. It has sixteen Fast Ethernet (10/100 Mbps) ports. Each attached device to these ports enjoys a dedicated connection with no bandwidth congestion issue.

For your convenience, ENH916P-NWY simplifies the operation procedures in many ways: the Plug-and-Play feature doesn't require software installation, the Front-panel Diagnostic LEDs monitor the activity status of the ports and the whole system, and the Auto-Negotiation feature allows each port to run at its optimum speed. Also, last but not the least, you don’t need to worry about the cable type, whether it’s crossed or not.

In addition, ENH916P-NWY Switch is ideal for micro-segmenting large networks into smaller connected networks for improved performance. It also reduces latency and achieves reliable data connection using its Store-and-Forward switching method.

Incorporate Encore 16-Port 10/100Mbps NWay Switch in your network infrastructure to benefit from both performance and convenience.

ENH924-AUT
10/100 24-PORT SWITCH

KEY FEATURES
Provide twenty four Fast Ethernet (10/100 Mbps) ports
Allow each port to run at its optimal speed while reducing network congestion
Feature plug-n-play operation that doesn’t require any software configuration
Provide front-panel diagnostic LEDs to monitor the operating status of the ports and the whole system
Provide compliance to many networking protocols
Allow micro-segmenting large networks into smaller networks for improved performance

Encore 24-Port 10/100Mbps NWay Switch is capable of delivering significant network load originating from large user group or from sources, such as video, audio, and graphic content. It has twenty four Fast Ethernet (10/100 Mbps) ports. Each attached device to these ports enjoys a dedicated connection with no bandwidth congestion issue.

For your convenience, ENH-924-AUT simplifies the operation procedures in many ways: the Plug-and-Play feature doesn't require software installation, the Front-panel Diagnostic LEDs monitor the activity status of the ports and the whole system, and the Auto-Negotiation feature allows each port to run at its optimum speed. Also, last but not the least, you don’t need to worry about the cable type, whether it’s crossed or not.

In addition, ENH-924-AUT Switch is ideal for micro-segmenting large networks into smaller connected networks for improved performance. It also reduces latency and achieves reliable data connection using its Store-and-Forward switching method.

Incorporate Encore 24-Port 10/100Mbps NWay Switch in your network infrastructure to benefit from both performance and convenience.

10/100 auto sensing ports - automatically detects optimal network speeds
Supports any combination of 10 Mbps or 100 Mbps network devices
Rack-mountable metal chassis
LEDs for Link Activity
10/100 Mbps for Half/Full Duplex
Nway Auto-Negotiation
Non-blocking design
Store and forward switching architecture

Special Features
24 port, 8000 MAC Address entries, 320 kBytes buffer memory

Specifications
Standards
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (Flow Control and Back-pressure)
ANSI/IEEE 802.3 N-Way Auto-negotiation
Protocol: CSMA/CD
Connectors: 24 10/100Base-TX RJ-45 ports
Switch Architecture: Store & Forward switch technology
Network Cables: Cat3, 4, 5 (UTP/STP)
Performance
Filter/Forward Rate
- 10BaseT: 14,880 pps (packets per second)
- 100Base-TX: 148,800 pps (packets per second)
MAC address entries: 8000 with Auto Learning
Buffer size: 320 kBytes
LEDs
Power (1): Yellow, lit when power is on
LINK/ACT (one per port):
- Green, lit when port is connected
- Green, blinking when data is being transmitted or received
Power input: 14 W power consumption
Internal 90 ~ 260 V AC, 50 ~ 60 Hz
UL Safety Approved

Environmental
Dimensions: 19", 1 U Rackmount
440(W) x 220(D) x 44(H) mm (17.25 x 8.75 x 1.75 in.)
Weight: 2.5 kg (5.5 lbs.)
Operating temperature: 0° ~ 55°C (32° ~ 140°F)
Storage temperature: -20° ~ 90° (-4° ~ 194°F)
Operating humidity: 10% to 90%, Non-condensing
Storage humidity: 5% to 95%, Non-condensing
Safety & EMI Certificates: CE & FCC

Package contents
24 Port Fast Ethernet Rackmount Switch
Rack-mount kit for rack installation
Power cord
User Manual

10/100 auto sensing ports - automatically detects optimal network speeds
Supports any combination of 10 Mbps or 100 Mbps network devices
Rack-mountable metal chassis
LEDs for Link Activity
10/100 Mbps for Half/Full Duplex
Nway Auto-Negotiation
Non-blocking design
Store and forward switching architecture
Lifetime Warranty

Special Features
32 port, 4000 MAC Address entries, 1 MBytes buffer memory

Specifications
Standards
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (Flow Control and Back-pressure)
ANSI/IEEE 802.3 N-Way Auto-negotiation
Protocol: CSMA/CD
Connectors: 32 10/100Base-TX RJ-45 ports
Switch Architecture: Store & Forward switch technology
Network Cables: Cat3, 4, 5 (UTP/STP)
Performance
Filter/Forward Rate
- 10BaseT: 14,880 pps (packets per second)
- 100Base-TX: 148,800 pps (packets per second)
MAC address entries: 4000 with Auto Learning
Buffer size: 1 Mbytes
LEDs
Power (1): Yellow, lit when power is on
LINK/ACT (one per port):
- Green, lit when port is connected
- Green, blinking when data is being transmitted or received
Power input
14 W power consumption
Internal 90 ~ 260 V AC, 50 ~ 60 Hz
UL Safety Approved

Environmental
Dimensions: 19", 1 U Rackmount
440(W) x 220(D) x 44(H) mm (17.25 x 8.75 x 1.75 in.)
Weight: 2.5 kg (5.5 lbs.)
Operating temperature: 0° ~ 55°C (32° ~ 140°F)
Storage temperature: -20° ~ 90° (-4° ~ 194°F)
Operating humidity: 10% to 90%, Non-condensing
Storage humidity: 5% to 95%, Non-condensing
Safety & EMI Certificates: CE & FCC

Package contents
32 Port Fast Ethernet Rackmount Switch
Rack-mount kit for rack installation
Power cord
User Manual

10/100 auto sensing ports - automatically detects optimal network speeds
Supports any combination of 10 Mbps or 100 Mbps network devices
Rack-mountable metal chassis
LEDs for Link Activity
10/100 Mbps for Half/Full Duplex
Nway Auto-Negotiation
Non-blocking design
Store and forward switching architecture
Lifetime Warranty

Special Features
48 port, 8000 MAC Address entries, 512 kBytes buffer memory

Specifications
Standards
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (Flow Control and Back-pressure)
ANSI/IEEE 802.3 N-Way Auto-negotiation
Protocol: CSMA/CD
Connectors: 48 10/100Base-TX RJ-45 ports
Switch Architecture: Store & Forward switch technology
Network Cables: Cat3, 4, 5 (UTP/STP)
Performance
Filter/Forward Rate
- 10BaseT: 14,880 pps (packets per second)
- 100Base-TX: 148,800 pps (packets per second)
MAC address entries: 8000 with Auto Learning
Buffer size: 512 kBytes
LEDs
Power (1): Yellow, lit when power is on
LINK/ACT (one per port):
- Green, lit when port is connected
- Green, blinking when data is being transmitted or received
Power input
14 W power consumption
Internal 90 ~ 260 V AC, 50 ~ 60 Hz
UL Safety Approved

Environmental
Dimensions: 19", 1 U Rackmount
440(W) x 220(D) x 44(H) mm (17.25 x 8.75 x 1.75 in.)
Weight: 2.9 kg (6 lbs. 4 oz.)
Operating temperature: 0° ~ 60°C (32° ~ 140°F)
Storage temperature: -20° ~ 90° (-4° ~ 194°F)
Operating humidity: 10% to 90%, Non-condensing
Storage humidity: 5% to 95%, Non-condensing
Safety & EMI Certificates: CE & FCC

Package contents
48 Port Fast Ethernet Rackmount Switch
Rack-mount kit for rack installation
Power cord
User Manual